![]() If the hill descent control doesn’t appear to be working properly, our certified technicians are always available to assist you in diagnosing any issues. Always be prepared to step on the brake in case you need to slow suddenly. Even though the car is maintaining your speed, you will still need to be cautious when going down a hill. The hill descent control system is designed to keep the vehicle under control, so you should be using it when necessary. Is it safe to drive with the hill descent control light on? Keep in mind that since the hill descent control uses the ABS to function, any problems with your ABS system will likely prevent you from using the hill descent control system. This indicator light cannot tell you when the brakes are being applied, but you’ll know it’s working if your vehicle is maintaining a constant speed without your having to apply the brakes. The owner’s manual will detail how your vehicle’s hill descent control works and when you can use it. Keep in mind that some systems must be toggled on while others may turn on automatically. When this light is illuminated, the system is active and monitors the wheels to keep them in check. What the hill descent control light means Refer to the owner’s manual for more specific information on how this system may work on your vehicle. When it was first introduced, this system could only maintain your vehicle at a specific speed, but due to recent advances in electronics, many systems can now be controlled using the cruise control speed buttons. The warning lights cover all generations of the C-Max and include diesel, petrol and hybrid versions. As it can be difficult to control the vehicle when off-roading and going down a hill, this system is used to help keep drivers safe. Below are the dashboard warning lights for the Ford C-Max. When the system is active, the anti-lock braking system (ABS) unit monitors the speed at which the wheels are rotating and applies the brakes to keep the vehicle at a safe, controlled speed. You’ll see these lights when your safety systems aren’t working, when your engine oil pressure is low, and other instances where it could be unsafe to drive your vehicle.Originally introduced by Land Rover, hill descent controls have become a common part of many off-roading focused vehicles. Red lights are might be interpreted as a “stop,” or might actually prevent your vehicle from starting to begin with. In some cases a light be yellow if you have chosen to disable a feature, like Dynamic Stability Control. Headlight - Passenger Side, with Bulb, (Sedan, Except SES Model) Part Number: ARBF100109. They say that a system isn’t working or might be malfunctioning. Location : Driver Side Assembly : With bulb (s) Light Source : Halogen. The lights essentially exist to inform you that a system is active and working. Your green lights should be the ones you recognize most, as they are systems you typically trigger, like cruise control or your turn signals. The colors are similar to what you see for traffic lights. When you look at the list of lights below, you might notice that there are a few different colors. ![]() The alternator should have been tested at the time of battery replacement. It’s fairly common for all the dash lights to come on with no alternator output, low voltage can cause unusual electrical issues. Do dashboard light colors means anything? The dash lights coming on and vehicle shutting down are, most likely, related to a charging system problem. Most people are familiar with some of the more common Mazda dashboard warning lights, such as the low fuel indicator, but the list found here at the Vic Bailey Mazda Blog shows even the ones you might not be as familiar with. Sometimes you can do everything right for your vehicle, but one day you start up your vehicle and the check engine light turns on anyway.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |